Locksmith Blog & News

How to Open a Safe Quickly and Easily With These 4 Methods

How to open a safe

If you are looking for a quick way to open a safe, then you’ve come to the right place. There are several methods you can use, so you’ll have plenty of options to choose from when you’re ready to get your hands dirty.  However, contacting a professional like US Lock Doc should be your first choice.

Drilling the lock core

If you are locked out of a safe or have lost your key, it is probably time to drill the lock core to get it open. This is an easy process if you have the right tools and know what you are doing. However, it is important to be careful because there are many legal pitfalls associated with this task.

When deciding to drill a safe, it is wise to determine how much the job will cost. You will want to get the right size bit and a suitable locking mechanism. Also, remember to wear safety gloves and hand protectors.

The drill bit must be the correct size for the lock. For example, if you are looking to open a 1/8 inch safe, you should use a bit that is slightly larger than that. Likewise, if you are going to drill through a 19 inch lock, you will need to invest in a bit that is just a little bit larger.

Using a lock template

The best way to do this is by getting a template for the lock. These are usually available at hardware stores. They will help you identify where the hole needs to be drilled. It will also make the task a lot easier.

In addition to drilling the lock, you will need to perform some other simple tasks. First, you will need to remove the outer cover of the lock. This is not the easiest task to accomplish. A small screwdriver can be used to pry it off. Once it has been removed, you will be able to see the locations of the screws.

Next, you will need a center punch. This is a special tool that serves as the guide for drilling the keyhole. Using a center punch is a much better option than using a hammer or a drill, and it will also ensure you do it right.

The proper method of drilling a safe varies by manufacturer. Some have an automatic punch that marks the correct location. Others have an indentation that will keep the drill bit from veering off the track.

Using a blowtorch

Using a blowtorch to open a safe can be dangerous. Many criminals use this to break into houses or apartments and steal the contents. The result is a huge mess and lots of noise. However, some professional locksmiths use this method to help open safes without damaging the contents.

Safety is important

If you want to learn how to use a blowtorch, make sure you have the right safety equipment. Keep your surroundings well ventilated and open the windows to ensure that you can use it safely. Also, prepare a water bucket and fire extinguisher.

When using a blowtorch, make sure to use a good quality gas. Typically, butane or propane are used. Often, these torches have a heavy reservoir of fuel on the ground. Make sure that you only touch the flame when you are absolutely sure it is off.

Blowtorches are great for melting metal. They also offer an alternative way to open locks without a key. In addition, they are used by chefs for cooking and finishing food.

One of the first chefs to use a blowtorch to sear meat was Thomas Keller. His technique was to use the blowtorch over the exterior layer of the meat. This caused a maillard reaction, creating a browned appearance on the exterior.

Depending on the type of gas that you use, the taste of the torch can be quite pronounced. It is especially noticeable in fatty meat dishes and in beef. But it is not as noticeable in fish dishes.

While there are many ways to melt metal with a blowtorch, some materials can become very flammable. Always wear heat-resistant protective gear when working with a naked flame.

Torches come in a wide variety of sizes and powers. Depending on your needs, you can choose a small, medium or large blowtorch. There are also torches with a forced-air supply. A common feature of most torches is a non-slip handle.

If you are interested in learning how to use a blowtorch, keep in mind that the best technique is to sweep the flame back and forth over the surface. You don’t want to concentrate on one area, or you could cause the food to burn.

Using a paper clip

If you have a safe that is difficult to open, a paper clip may be just the trick for you. Paper clips come in all shapes and sizes and are used for a variety of things from keeping travel notes together to securing foreign currency. You can even use a paper clip to open a safe with no key!

While the paper clip isn’t the sexiest or most aesthetically pleasing option, it’s a convenient one and easy to use. Not only does a paper clip make the latch look like it has never been opened, it also lifts the latch from the keeper, so you can simply slide it back into place. This is particularly helpful for locks with a lock-keeper that has been re-installed.

For those that don’t want to use the standard paper clip, a nail file is a good substitute. However, using a nail file requires you to hold it in place for the entire duration of the task, and it’s also likely to leave behind a piece of metal that can damage the locking mechanism of the safe. Using a nail file will also make a loud ‘click’ noise when you push it in and out of the lock, which is a problem if you’re trying to conceal it.

One of the more popular uses for a paper clip is for securing loose hems or other items. Rather than tossing it in the bin, try wrapping it in a sheet of paper or stringing it together with a wire. A nail file can also be used to unplug a clogged salt shaker hole, re-latch a door, and fix a broken necklace clasp.

The best use for a paper clip is to pick a lock, but if that’s not an option, you’ll probably find other uses for it. A paper clip can be used to secure loose hems, fix a broken necklace clasp, or open an envelope. It can even be used to fix a smashed salt shaker hole! But be careful, as a paper clip can break from excessive pressure, and a smashed salt shaker hole can be dangerous!

Requesting a replacement combo from the manufacturer

If you have locked your safe but cannot figure out the combination, you may need to call the manufacturer and request a replacement. However, the manufacturer will likely need proof of legal ownership to be able to provide you with the correct combination. For instance, you can provide your safe’s serial number or other documentation that proves that you are the owner. The manufacturer may also require that you provide a notarized copy of the document.

Alternatively, you can contact a local locksmith who can retrieve the combination from the safe. This process is usually a relatively simple one. First, you need to locate the safe’s serial number, which is typically located on the side of the safe. You then need to call the manufacturer and provide them with this number. While you’re at it, you should also take the time to inspect the safe’s door for any obstructions. If the contents are shifted, the bolts can become blocked.

Once the manufacturer confirms that you are the owner of the safe, you can begin resetting the combination. Follow the manufacturer’s instructions carefully. When you start the combination over, be sure not to pass the number more than twice. After all, if you do accidentally try to repeat the process, you will need to restart it from the beginning. Finally, don’t leave the safe unlocked for too long. Otherwise, the combination can be compromised.

Usually, safe manufacturers will charge you for the service. However, it is worth asking because you will then be able to get a new key for your safe.

Disclaimer: This article is for informational purposes only, please contact a professional like US Lock Doc if you need a safe opened.  US Lock Doc is not responsible for damage caused by following this article.

If you like what you read, check out our other articles here.


Check out our monthly newsletter and subscribe to your topics!

Subscribe to our Newsletter

Ready to get started, Get our Newsletter and join the Community!

More Weather Articles & News

Other articles that may be of interest

Get A Free Quote

Locksmith in workshop makes new key, use grinding engraving machine