A mortise lock is a lock that is installed in a cabinet, such as a kitchen or bathroom. The operation of the lock is either mechanical or electromechanical. It is important to know what type of installation you have to do before you purchase the lock. There are some steps you can take to ensure that you do not have a problem installing the lock.
Mechanical or electromechanical lock operation
A mortise lock is a type of lock that requires a precision cut into a door. There are several types of locks that can be used for this application. They include cylindrical locks, sashlocks, and mortise deadbolts. Each is capable of providing a different level of security, depending on its design.
Mortise door locks are generally made by commercial manufacturers. There are several different brands and types of mortise locksets, including Corbin Russwin, Yale, Schlage, and Best Access. The design of the strike plate of these locks is very elegant. These locks are suitable for both residential and commercial properties. In order to install these locks, it is necessary to have special equipment and knowledge.
The LB series of mortise locks is a new product from the PERCo company. Its unique features make it a favorite among the security community. This series of locks is designed for medium and small doors. Its potential operating mode is unknown.
Electrified mortise locks are also available. Most of them have mechanical override functionality. However, more expensive models can be set to operate in fail-secure or fail-safe modes. An audit trail will reveal whether a door has been opened without the proper code.
Mortise locks are very durable and resistant to abuse. However, they are more difficult to install than cylindrical or sashlocks. Installing them can be done by a professional or a homeowner. If you decide to install a mortise lock yourself, keep in mind that it can be difficult to drill into a door to create the needed hole for electrical wires. Also, cutouts may weaken the door’s structure.
Electromechanical locks offer many additional features. For example, they can use magnetic stripe cards, proximity cards, or biometrics to secure the entry to a building. Some of them can even perform a security audit. Other EM locks can notify if the latch is not extended, and some can monitor the sabotage loop.
Allegion L Series locks are available in a variety of options, with some models offering indicators. Many EM locks are open architecture, which means they can be controlled through third party software. You can also find wireless networked EM locks with proprietary software.
Securitech QID is a mechanical mortise lock deadbolt that offers a wide range of advanced features. It has an attack-resistant outside lever, and an inside button for rapid and easy extension. It can be extended using outside mortise cylinders. Integrated into the inside trim of the door, the visual indicator gives an indication of the status of the lock.
When choosing a mortise lock, consider the location of the door, the requirements of the local and national codes, and the needs of the user. It is also important to discuss any specific features and specifications with the end-user.
Preparation for the installation
If you’re installing a mortise deadbolt, you’ll need to make sure you take the time to do it right. The key to installing a mortise lock is to make sure you use the right tools, have a good grasp of the drill, and know what you’re doing. To ensure a successful install, follow these tips for prepping your door:
Prepping the door for a mortise deadbolt involves marking the area where the strike plate will go, drilling a series of holes, and chiseling out the mortise pocket. These steps will vary depending on the type of lock you’re installing. Typically, a mortise lock will have a pocket that’s 1″ wide by 6-1/2″ high by 4-1/4″ deep. It’s best to mark the pocket before you start drilling so you know where you’re going.
After you’ve marked the pocket, you’ll need to cut out the pocket using a mortise cutter and a brace. A brace is a U-shaped steel hand tool that has a bit chuck on one end and a wood cap on the other. This tool has the advantage of being compact and exerting a lot of torque. You’ll want to be careful when chiseling, though, so you don’t accidentally break or split the wood.
A framing square is a useful tool for measuring and marking the location of the strike plate. It can also be used to trace the strike plate on the edge of the door. In addition, a hole saw is another handy item to have on hand.
Next, you’ll need to drill out the main bore holes in the mortise box. In most cases, you’ll need to use a drill bit that’s at least as wide as the thickness of the mortise body. Be sure to keep the auger bit parallel to the door skins so it’s not cutting too deeply.
Once the mortise has been drilled out, the box will be fastened to the edge of the door with screws. It’s important to mark the center of the box and the jamb, so that you can extend the lock and properly align it.
While you’re removing the webbing, you’ll also need to clean up around the mortise pocket. There are several tools you can use to do this, including a sharp 1/2″ chisel. Before you chisel out the pocket, you’ll want to use electrical tape to see which way you should turn the bit. Alternatively, you can simply hold the lock to the face of the door and mark where the pocket should be.
Using the template, drill a series of smaller holes in the same area as the larger ones. This should allow you to insert the deadbolt into the pocket without catching the front of the door.
Cost of a new lock
The cost of installing a mortise lock is dependent on a number of factors. These include the type of door you have, the complexity of the job, and your location. A basic deadbolt may cost as little as $30 while an expensive electronic model may run you more than $400. If you don’t want to take the time to install the lock yourself, you can hire a professional to do the job.
Although deadbolts aren’t cheap, they offer a high level of security. In fact, the right deadbolt can make your home less attractive to break-ins and prevent thieves from picking your lock. Whether you install the lock yourself or have a pro do the work, a new deadbolt is a worthwhile investment.
When it comes to deadbolts, there are three main types to choose from. They range from keyless models to high-tech ones with built-in features. However, a keyless model is not necessarily the best choice. You’ll also have to pay extra for additional features such as a high-security cylinder, a smart-lock, and a handle set.
In addition to the price of the actual deadbolt, you’ll also have to consider the cost of drilling holes in the door and screwing in the deadbolt. This can increase the cost by as much as $50.
Another factor that can affect the overall cost of a mortise lock is the type of hole saw you’ll need. The price of a good hole saw can vary from $10 to $50. An electric drill can be purchased for around $30. Power drills are pricier, though.
Another consideration is the type of lock you’ll be installing. Exterior door locks can cost anywhere from $40 to hundreds of dollars, depending on the model and technology. For interior door locks, the cost can be as low as $15 to $60. It’s important to choose a Grade 2 lock that meets fire rating standards.
One of the most interesting aspects of deadbolts is the fact that they come in a variety of designs. Among them, the single-cylindrical deadbolt is the most common. However, if you prefer something with a little more finesse, you can invest in a cylindrical or lever style.
Getting a deadbolt installed on your own is relatively easy. You can buy them at your local hardware store or online. However, a professional may have a better idea of what type of deadbolt is right for your needs. To get the most out of your deadbolt, you’ll want to install it 6 to 12 inches above the doorknob.
Finally, you can do a quick search to find out whether or not your local locksmith offers the cheapest lock changing services. While a reputable locksmith will have a variety of lock options to choose from, you’ll also have to pay for their time and the corresponding trip fees.
If you like what you read, check out our other articles here.